John's Waterproofing Before & After Photos

The customer called because they had an unfinished portion of their basement that constantly had moisture. Constant moisture under your house can cause numerous problems. Such as mold growth, rotting posts, and musty smells that spread to the house. Our crews installed our CleanSpace vapor barrier that is 20 mils thick and seals the space. The customer was so happy because now they could use this part of the basement for storage. 

This home had a WaterGuard Drainage system installed a few years back, and while the water and moisture were addressed, the old water stains on the walls were still there. To get a semi-finished look in the basement, the homeowners had us install BrightWall panels along the walls. These will not mold or mildew, and are easy to clean while also brightening the space. 

This homes basement had been finished, but water was leaking through the walls. Along the floor a dampness was felt, and this was discovered on the lowest sections of the drywall as well. The homeowners pulled off a section of the drywall and discovered the fiberglass in the walls had some mildew growing. It was holding onto that moisture and just slowly leaking down. To address this issue we went in and removed the rest of the drywall and fiberglass insulation. We then installed a full interior perimeter waterproofing system with a sump pump to collect water and send it away from the home. On the walls we installed our ThermalDry radiant vapor barrier. This will provide a thermal break as well as act as a vapor barrier to safely guide the moisture from the wall down to the new drain system. We then refinished the walls. Now the space is usable once again and protected against water damage. 

This customer had found some flooding in their basement that caused water damage to the semi-finished bonus room. Our crew installed a SaniDry XP and ThermalDry dark walnut flooring for a beautiful finished basement floor. 

This customer called because they had water coming into their finished basement. They wanted an inspector to come out and find where the water is coming from and to fix it. 

Our inspector Eric went out and found the water had been leaking from the basement window. Water was coming from outside to the window and leaking down the wall to the basement floor. We installed our patented WaterGuard system along the perimeter of the basement floor. To fix the window leaking we installed a window well drain that goes under the window and drains the water to the unseen WaterGuard system. To which drains the water to the Super sump that pumps the water out and away from the house. 

This homeowner can now enjoy his finished basement knowing that water isn't leaking into his basement for years to come.